Mudcat MC-915 Auger Dredge 2005 132 500,00 $ CAD *

Description

Mudcat MC915 Auger Dredge

Construction material – Steel

• Length : 38’ 11″
• Width : 9′ 0″
• Height : O.A.8’8′
• Weight : 21,000 lbs. & Dry
• Draft : 21″
• Floating Clearance : 6’9″
• Fuel Capacity : 360 gallons
• Pontoons : Two 36″ x 32″ x 330″

10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled

• Auger: Diameter 13-5/8″
• Pitch : 11″
• Flighting: 3/8″
• Speed: Up to 100 RPM
• Cutter Knives: 45 Detachable Heat-Treated Blades
• Cutter Bars: 36 Detachable Heat-Treated Blades
• Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
• 19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
• Operating: Depth-15′ maximum
• Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
• Clutch—Manual: 14″ Dia. Disc & Pressure Plate
• Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
• Centrifugal Closed Impeller
• Impeller Diameter: 19-1/2″
• Suction Diameter: 8″
• Discharge Diameter: 8″
• Shaft Diameter: 2-7/8″
• Capacity: 2000 GPM @ 1160 RPM against 180′ Head
• Material Removal: To 120 Cu. yds./hr.
• Capacity: 75 GPM @ 2800 RPM
• Pressure: 80 PSI

Dual Pumps

• Capacity Total: 30.5 GPM @ 1800 RPM
• Reservoir : 47 Gallon
• Circuit One:  Auger Drive
• Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting:

• Auger : 3000 PSI
• Others: 1500 PSI

Treble Sheave Hydraulic Winch

• Traverse Speed: 50 FPM Maximum Forward & Reverse
• Average Cutting Speed: 8 to 12 FPM
• Voltage: 12V
• Alt. Output: 65 Ampere
• Batteries: 12V, 205 Ampere Hour, Parallel Wired
• Circuits: 2 Wire System Full Ground

Polyurethane finish coat on corrosion inhibitive epoxy primer

• Standard Colors: Green and White

Located in Eastern Ontario, Canada